| |
Magmasoft/ Anycasting軟件可對充型時間和金屬流動速度、金屬溶液的溫度，凝固時間、宏觀及微觀縮孔的判定、冷卻曲線、鑄件及鑄型的溫度、枝狀晶的宏觀結構及分布、機械性能、鑄件殘余應力及變形等進行模擬分析，可查看溫度、速度、壓力等物理量的分布圖，繪制感應器所在位置處的溫度、速度、壓力的圖標，實時的動畫顯示充型及凝固過程，使用多種判據預測產品收縮，氧化夾渣、卷氣缺陷，發熱模型對產品收縮產生的影響，過濾網對流動產生的影響，預測澆注和凝固過程中砂芯和砂箱發氣導致的困氣缺陷，產品的應力分布、變形量及裂紋風險。
technology
Simulation analysis MAGMAsoft / AnyCasting software
can simulate and analyze mold filling time,
metal flow velocity, temperature of metal solution,
solidification time, judgment of macro/micro
shrinkage cavity, cooling curve, temperature of
casting and mold, macro structure and distribution
of dendrite, mechanical properties, residual stress
and deformation of casting. Can view
temperature, velocity The distribution diagram of
physical quantities, such
as pressure, draw the
record of
temperature, speed and pressure at the location of
the sensor, display the filling and solidification
process in real time, use a variety of criteria to
predict product shrinkage, oxidation slag inclusion
and air entrainment defects, the impact of heating
model on product shrinkage, and the impact of filter
screen on flow. Predict
the gas trapping defects caused by the gas
generation of sand core and sand box during pouring
and solidification, and the stress distribution,
deformation and crack risk of the product.
|
|
技術中心 
